1 thought on “How to make good -looking bead bracelets, how to make three laps from three transshipment bead bracelets”
Sonja
When it comes to how to make the transshipment pearl bracelet, everyone knows that some people ask how three tranquil bead bracelets are compiled in three laps. In addition, some people want to ask the golden transshipment bead bracelet compilation method. You know what is going on? In fact, how is the red rope of the golden transshipment beaded? Let ’s take a look at how the three transshipment bead bracelets are compiled in three laps. I hope it can help everyone! How to compile the transshipment bead bracelets
1. How to compile the transshipment bead bracelet: how to make three laps of three tranquil bead bracelets, if it is three laps, three uniform separation, so When the transshipment beads are row in rows. Transfer bead red rope bracelet. Step Methods Transfer Pearr Bracelet Compilation Method. 1. Put the rope according to the position shown in the figure, and then fix the rope with a large needle. Complete works of transshipment bead bracelet woven tutorials. How is the red rope of the golden transshipment bead? 2. Put the rope on the right on the middle rope. 3. Put the left rope on the rope below. 4. The rope on the top is passed through the hole from the bottom to the bottom, and then tightened the ropes on both sides. 5. Repeat the previous step in the opposite direction. (First put the rope on the left on the center rope, and then set the rope on the right to the rope below. Put the rope on the top from the bottom to the left. The rope is tightened, so it is woven by a flat knot. How can 5 transport beads look good. 7. Weaving one end of flat knots, then put on a bead, hook the rope on the left and right sides with a hook needle when the end is closed. Just enter the flat knot. 8. In order to allow the bracelet to have flexibility, we also need to stack the ropes of both ends together, and then add a rope to a new flat knot in the middle. R. R. n 9. Put the ropes of both ends into the small beads, and then hit the end of the rope at the end of the rope. As shown in the figure above, a beautiful bead bracelet is made. n 2. How to compile the transshipment bead bracelet: Golden Transit Bead Bracelet Materials: Line, Transfer Bead Transfer Bead Rope Compilation Method. How to make a good look at the living beads. 2. Make a section of four braids with a longer four threads. The length of the four braids is your finger surround . Then use the lighter to scald down, and then trim the head with scissors to use the bead hole that can pass through 3mm. How can 5 transport beads make the bracelet look good. , Cut 2 wires like this and trim the knot head 5, 4 line heads facing into a 3mm wrapped golden beads in the transshipment bead ring simple weaving. 6. Pulling Tighten the head, pull the heads on both sides into the bead hole to transfer the trapped bead bracelet method. 7. Look at the left side, use four braids as sandwich, the two threads are knotted on the four braids, and the knot is about 5mm. That's enough, don't tighten a circle first. 8. The same method is used to make the same length knot on the right. You can tighten a circle if the length of the two sides is the same. Cut off the burning and stick it, the ring is completed.
3. How to make the transshipment bead bracelet look good: How is the red rope of the golden transport beads? 1. First prepare four red ropes, and make a knot at 5-6 cm at the end of the line. . The length of the length is divided into four lines, which press the second article, and the second. Article 3 and Article 3 of Article 3. 3. Article 4 of the line is then worn out of the line. . Transfer bead bracelet picture appreciation. Transit beads: The transshipment beads are made of gold, silver, jade, or beeswax into red or oval beads with golden dates. Put on the red silk thread or necklace, you can wear it on your fingers like a ring, or you can wear it on your wrist and neck. Essence
4. How to compile the transshipment bead bracelet: How to prepare this transshipment bead bracelet? This is an ordinary knot. The one -week part of the bracelet is the end of the node surface. It can shrink and adjust the length to enable the hands to go in smoothly. Is to answer can help you The above is how to compile related content with three tranquil bead bracelets. It is about how to make three laps from three transshipment bead bracelets. After reading how to make the transshipment bead bracelet, I hope this will be helpful to everyone!
When it comes to how to make the transshipment pearl bracelet, everyone knows that some people ask how three tranquil bead bracelets are compiled in three laps. In addition, some people want to ask the golden transshipment bead bracelet compilation method. You know what is going on? In fact, how is the red rope of the golden transshipment beaded? Let ’s take a look at how the three transshipment bead bracelets are compiled in three laps. I hope it can help everyone!
How to compile the transshipment bead bracelets
1. How to compile the transshipment bead bracelet: how to make three laps of three tranquil bead bracelets, if it is three laps, three uniform separation, so When the transshipment beads are row in rows. Transfer bead red rope bracelet.
Step Methods Transfer Pearr Bracelet Compilation Method.
1. Put the rope according to the position shown in the figure, and then fix the rope with a large needle. Complete works of transshipment bead bracelet woven tutorials.
How is the red rope of the golden transshipment bead? 2. Put the rope on the right on the middle rope.
3. Put the left rope on the rope below.
4. The rope on the top is passed through the hole from the bottom to the bottom, and then tightened the ropes on both sides.
5. Repeat the previous step in the opposite direction. (First put the rope on the left on the center rope, and then set the rope on the right to the rope below. Put the rope on the top from the bottom to the left. The rope is tightened, so it is woven by a flat knot. How can 5 transport beads look good.
7. Weaving one end of flat knots, then put on a bead, hook the rope on the left and right sides with a hook needle when the end is closed. Just enter the flat knot.
8. In order to allow the bracelet to have flexibility, we also need to stack the ropes of both ends together, and then add a rope to a new flat knot in the middle. R. R. n 9. Put the ropes of both ends into the small beads, and then hit the end of the rope at the end of the rope. As shown in the figure above, a beautiful bead bracelet is made. n
2. How to compile the transshipment bead bracelet: Golden Transit Bead Bracelet Materials: Line, Transfer Bead Transfer Bead Rope Compilation Method. How to make a good look at the living beads.
2. Make a section of four braids with a longer four threads. The length of the four braids is your finger surround
. Then use the lighter to scald down, and then trim the head with scissors to use the bead hole that can pass through 3mm. How can 5 transport beads make the bracelet look good. , Cut 2 wires like this and trim the knot head
5, 4 line heads facing into a 3mm wrapped golden beads in the transshipment bead ring simple weaving.
6. Pulling Tighten the head, pull the heads on both sides into the bead hole to transfer the trapped bead bracelet method.
7. Look at the left side, use four braids as sandwich, the two threads are knotted on the four braids, and the knot is about 5mm. That's enough, don't tighten a circle first.
8. The same method is used to make the same length knot on the right. You can tighten a circle if the length of the two sides is the same. Cut off the burning and stick it, the ring is completed.
3. How to make the transshipment bead bracelet look good: How is the red rope of the golden transport beads?
1. First prepare four red ropes, and make a knot at 5-6 cm at the end of the line.
. The length of the length is divided into four lines, which press the second article, and the second. Article 3 and Article 3 of Article 3.
3. Article 4 of the line is then worn out of the line. . Transfer bead bracelet picture appreciation.
Transit beads:
The transshipment beads are made of gold, silver, jade, or beeswax into red or oval beads with golden dates. Put on the red silk thread or necklace, you can wear it on your fingers like a ring, or you can wear it on your wrist and neck. Essence
4. How to compile the transshipment bead bracelet: How to prepare this transshipment bead bracelet? This is an ordinary knot. The one -week part of the bracelet is the end of the node surface. It can shrink and adjust the length to enable the hands to go in smoothly.
Is to answer can help you
The above is how to compile related content with three tranquil bead bracelets. It is about how to make three laps from three transshipment bead bracelets. After reading how to make the transshipment bead bracelet, I hope this will be helpful to everyone!